EFM62 Plug-in electromagnetic flowmeter
The EFM62 plug-in electromagnetic flowmeter features automatic range switching, forward and reverse flow calculation, upper and lower limit alarms, air traffic control alarms, power outage protection, and small signal cutoff functions. In pipeline flow detection, it is easy to install, can not cut off the flow, the instrument applies the principle of “automatic zeroing”, eliminates electrochemical interference signals, zero point self stabilization, has multiple protection levels and installation methods, and has an IP68 protection level suitable for submersible installation, meeting different environmental requirements.
This plug-in electromagnetic flowmeter is suitable for detecting the flow rate of liquids with conductivity above 50 μ s/cm, such as water and sewage.
Related Products
Additional information
| Diameter | 300…3000 mm |
|---|---|
| Flow velocity range | 0.1…10 m/s |
| Accuracy | 0.5…10 m/s: ±1.5%F.S; 0.1…0.5 m/s: ±2.0%F.S |
| Conductivity | > 50 μs/cm |
| Temperature (Medium) | -20…+80°C [-4…+176°F] |
| Temperature (Environment) | -10…+60°C [+14…+140°F] |
| Power | ＜ 20 W |
| Voltage resistance level | ≤ 1.6 MPa |
The EFM62 plug-in electromagnetic flowmeter features automatic range switching, forward and reverse flow calculation, upper and lower limit alarms, air traffic control alarms, power outage protection, and small signal cutoff functions. In pipeline flow detection, it is easy to install, can not cut off the flow, the instrument applies the principle of “automatic zeroing”, eliminates electrochemical interference signals, zero point self stabilization, has multiple protection levels and installation methods, and has an IP68 protection level suitable for submersible installation, meeting different environmental requirements.
This plug-in electromagnetic flowmeter is suitable for detecting the flow rate of liquids with conductivity above 50 μ s/cm, such as water and sewage.
This plug-in electromagnetic flowmeter is suitable for detecting the flow rate of liquids with conductivity above 50 μ s/cm, such as water and sewage.
